Beurer ME80 Instructions For Use Manual Beurer ((FREE))
LINK ->>->>->> https://urlgoal.com/2twmUY
How to Use the Beurer ME80 Mobile ECG Device
The Beurer ME80 is a mobile ECG device that allows you to monitor your heart rhythm anytime and anywhere. It is easy to use and can store up to 99 measurements. You can also transfer your data to a PC and use the Beurer ECG Manager software to analyze and print your results. Here are some steps on how to use the Beurer ME80 mobile ECG device.
Step 1: Charge the device
The Beurer ME80 comes with a rechargeable battery that can last for about 50 measurements. To charge the device, connect it to a USB port on your computer or a USB power adapter using the supplied cable. The battery symbol on the display will flash while charging and stay on when fully charged. It takes about 2 hours to charge the device completely.
Step 2: Set up the device
Before using the device for the first time, you need to set up some basic settings, such as date, time, user number, and measurement mode. To do this, press and hold the SET button for 3 seconds until the display shows \"DATE\". Use the arrow buttons to adjust the values and press SET to confirm. Repeat this process for TIME, USER (1 or 2), MODE (single or continuous), and UNIT (mmHg or kPa). You can also change these settings later by pressing and holding the SET button again.
Step 3: Take a measurement
To take a measurement, hold the device in your right hand and place your left thumb on the metal contact on the back of the device. Make sure your hands are clean and dry. Press the START/STOP button to start the measurement. The device will beep and show your heart rate on the display. After 30 seconds, the device will beep again and show your ECG waveform and result. The result can be one of four symbols: normal, tachycardia (fast heart rate), bradycardia (slow heart rate), or arrhythmia (irregular heart rhythm). If you want to stop the measurement before 30 seconds, press the START/STOP button again.
Step 4: View and delete measurements
The Beurer ME80 can store up to 99 measurements for each user. To view your measurements, press the MEM button. Use the arrow buttons to scroll through your measurements. The display will show the date, time, heart rate, ECG waveform, result, and blood pressure (if measured). To delete a measurement, press and hold the DEL button for 3 seconds while viewing it. To delete all measurements for a user, press and hold the DEL button for 3 seconds while in standby mode.
Step 5: Transfer and analyze data
To transfer your data to a PC, you need to install the Beurer ECG Manager software on your computer. You can download it from https://www.beurer.com/web/gb/service/instructions-for-use.php. Connect your device to your computer using the supplied cable. Open the software and follow the instructions on the screen. You can view your data in graphs or tables, add comments or notes, print reports, or export data to other formats.
Tips and warnings
The Beurer ME80 is not a medical device and cannot replace a professional diagnosis or treatment. Consult your doctor if you have any concerns about your heart health.
The device is not suitable for people with pacemakers or other implanted devices.
The device is not waterproof and should not be exposed to moisture or high temperatures.
The device should be cleaned with a soft cloth dampened with water or alcohol. Do not use any abrasive or corrosive substances.
The device should be stored in a dry and cool place away from direct sunlight.
The battery should be replaced by an authorized service center when it reaches its end of life. aa16f39245